Huge huge HUGE thanks to Raz and his girlfriend for getting this thing in my car today while I was at work!  He said he didn’t have anything else to do…so I showed up, bolted up the transmission mount and got the car back on the ground to check out how it sat.  It settled a little more then a 1/2 inch.  It looks like I can space the motor mounts up about 1/2 of an inch, so I am going to do that and put the collars back on the top of the coilover mount and raise the car about a 1/3 of an inch, so my oil pan clearance will be a little less scary (and well above the subframe)!  I will be making a hefty skid plate as well.

While the car was up I took some shots of the suspension mods to show how the arms sit.  I am not done tweaking it all, I have to put the misalignment spacers on it still, which will give me another 12.5mms of adjustment from the flat adjustment shot (28.XXmm).  I was also pleased to see I had about 2 inches of travel before I hit my fender frame rails, even at this extreme of a height.  I just can’t wait to get this thing rolling!